Audiology | Hearing Aids | Impression Technology | Ear Impressions | Ear Moulds | Training | NG5 | Nottinghamshire | 0870 756 6888

Advanced Impression Technology

Impressioning Material & Equipment

Injection Pistol Impression Technique

Materials & Equipment for Impression Gun procedure.

Egger S50 Silicone Impression Cartridges

Egger A Soft S 50

Silicone impression material in S50 double cartridges, very easy flow, achieves a high degree of form consistency after taking the impression. Consists of 8 x 50ml cartridges.

Self mixing, blue in colour.

Viscosity approx - 140 000 mPa.s

Hardness - 35 Shore A

Egger A/ITE S 50

Taking the same form as A soft, but with a soft consistency, extremely easy flow & high form of consistency after taking the impression. Especially recommended for CIC/ITE impressions.

Consists of 8 x 50 ml.

Self mixing, Pink in colour.

Viscosity approx – 100 000 mPa.s

Hardness – 34 Shore A

Egger A/II S 50

Soft silicone impression material in double cartridges characterized by a high impression exactitude, tensile strength and form consistency.

Consists of 8 x 50 ml.

Self mixing, Red in colour.

Viscosity approx – 100 000 mPa.s

Hardness – 40 Shore A

Egger Flex/AB (Instant Earmoulds)

Addition vulcanising, 2 component silicone for manufacturing permanent – elastic earmoulds; cold vulcanisation material in double cartridges suitable for single stage instant impression taking. Available in different colours & final degree hardness.

Please contact us for your suitable specification

Egger Aqua (Swim Earmoulds)

Addition vulcanising buoyant silicone materials suitable for manufacturing sound – absorbing & splash – protection earmoulds;

Consists of 4 double cartridges, each 2 x 24 ml.

Colours: Red & Blue.

Hardness: 35 Shore A

Impression Guns

Injector S50

Injector pistol especially developed for highly viscous two-component silicone materials on S50 double cartridges (e.g. egger A/soft, egger A/ITE, egger A/II)

Injection Pistol (Low pressure)

For both impression materials & instant silicones, the manually operated injection gun allows for controlled impression taking with the full range of cartridge based silicones.

Mixing Canulas for Injector Guns

[

Mixing Canulas for S50 (green 8mm)

Attachment to be put onto the S50 double cartridges for automatic mixing of the impression material, egger A/II

40 pcs

100 pcs

Mixing Canulas for S50 (pink 6.75mm)

Attachment to be put onto the S50 double cartridges for automatic mixing of the impression material, egger A/soft & egger A/ITE.

40 pcs

100 pcs

Mixing Canulas for S50 (yellow 5.70mm)

Attachment to be put onto the S50 double cartridges for automatic mixing of the impression material, egger A/soft & egger A/ITE.

40 pcs

100 pcs

Syringe Impression taking

Materials & Equipment for Syringe impression procedure.

Addition Silicone

Egger A

Addition-vulcanising silicone impression material with extremely high stability, impression exactitude, tensile strength and form stability; consisting of 2 components: white & blue.

Hardness after 1 hr approx: 36 shore A

1 unit = (2 Tubs x 700g each).

Egger A/I

Addition-vulcanising silicone impression material with a very soft consistency and an extremely smooth texture for highly precise and detailed impressions; consisting of two components: white & green.

Hardness after 1 hr approx: 21 shore A

1 unit = (2 Tubs x 660g each).

Egger A/II

Addition-vulcanising silicone impression material with a very soft consistency and high impression exactitude, tensile strength and form consistency; consisting of two components: white & red.

Hardness after 1 hr approx: 40 shore A

1 unit = (2 Tubs x 700g each).

Impression Syringes